[Orion] Orion display issue

[Joe Giacobello]

I am using firmware version 2.05 and it has been a major improvement 
over v. 1.372.  However, I recently turned off my gear and when I turned 
it back on again, the display was much dimmer and I was not able to 
select the various options in the menus because the highlight would not 
move from its topmost position.  The highlighted selections tended to 
"stretch" as I turned the main dial but would  not move to the next 
selection.

Finally, I did a master reset and after persisting at the menus for a 
while, I was able to select the display contrast.  Now, in order to have 
an acceptable display, I had to reduce the contrast to 36%.  Originally, 
it was at 50%.  The highlight selections are still are little erratic.
 
I wonder if anyone else has had this problem and if they know the cure.

73, Joe
K2XX