[RFI] Yaesu G-1000SDX rotator

[Kelly Boswell]

My rotator is susceptible to RF from 2m FM and 10m SSB or FM.  When transmitting
on either band,  the indicator moves clockwise 45 degrees.  This doesn't happen
on lower freqs.

A split bead ferrite (#43 mixture) on the rotator wire has minimal effect. 
Likewise,  a split bead ferrite (#43 mixture)  on
the power line has minimal effect.  Any one been through this?

Should I use bead of a different mixture?   

Kelly,
KA5MGL



--
Submissions:              rfi@contesting.com
Administrative requests:  rfi-REQUEST@contesting.com
WWW:                      http://www.contesting.com/rfi-faq.html
Questions:                owner-rfi@contesting.com