[RFI] Re: triac circuits
K March
kmarch at ix.netcom.com
Mon Dec 27 12:13:08 EST 2004
Jon, Thanks for the constructive answer. That helps. Do you remember if
you put the beads on the load side of the triac, the input side or both?
Both is probably the best bet. Were they windings on a ferrite core, or
simply clamp on (one turn) ferrites? thanks, Bob
----- Original Message -----
From: "Jon Zaimes AA1K" <jz73 at verizon.net>
To: <kmarch at ix.netcom.com>; <rfi at contesting.com>
Sent: Sunday, December 26, 2004 9:54 PM
Subject: re: triac circuits
> I had some hash about 12 years ago from a quartz pole lamp with a triac
control in an apartment we rented out in the same building as our residence
(a big old Victorian house). It just killed reception on a 600-ft JA
Beverage that was 10-15 feet away.
>
> I solved by getting permission to remove the lamp to my workbench ....
dismantled it and used some small ferrite beads on the leads inside the
lamp. Solved the problem.
>
> 73/Jon AA1K
>
More information about the RFI
mailing list