[RFI] new rfi source in house!

Christian Buenger c.buenger at gmx.ch
Sun Nov 19 07:48:42 EST 2006

Hi David,

probably they use a bus system on an unshielded cable. My heating
system is similar. Although it does not generate QRM sometimes the
heating "stalls" after transmitting on HF and you have to power it
down to reset it :(

If you can, you might want to try shielded cable to avoid radiation
from the cable itself.

Christian, DL6KAC

On 11/19/06, David Robbins K1TTT <k1ttt at arrl.net> wrote:
> Argh... this should have been safe, I thought.  Friday I had a Rinnai
> tankless hot water heater installed, now I have pulsing qrm on several sw
> bands.  They seem to have nicely avoided the 6 hf contest bands at least.
> Anyone know what these are doing?  The manual doesn't say a thing about how
> they are controlled other than to hook up the 2 wire cable from the remote
> controller to the heater.
> David Robbins K1TTT
> e-mail: mailto:k1ttt at arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi

mailto:c.buenger at gmx.ch
fax2mail: +49 25 61 / 9 59 42 99 20

More information about the RFI mailing list