[RFI] noise elimination

[dxhogg at aol.com]

I have been experimenting again and have come up with a very good cure for rfi emanating from your neighbors house. I have been experimenting with clip on beads type 31 mix from dxengineering they sell 5 pack with 3/4 inch hole. what you do is remove the beads from their shell and for a 60 amp drop you use 4 bead half's for 200 amp drop 6 bead half's.What you are trying to achieve is making a closed box of beads that you can attach to the line drop on the house side of the meter.?
?????????????????????????????????????????????????????? =====
??????????????????????????????????????????????????????[?????????]
??????????????????????????????????????????????????????[?????????]????????????
?????????????????????????????????????????????????????? =====
the horizontal dashed lines represents 2 bead halfs?? the vertical bars are one bead half the bottom 2 bead half's do not get glued till the primary piece is installed in place?? super glue the top and 2 sides together let dry. take bottom 2 bead half's and glue together? remember you are looking down on to this device? take the main piece 4 bead half's that?are glued together and slip around line drop on the house side of the meter then take the 2 bead half's and glue to primary piece making a closed box around line drop the 6 piece unit fits nicely around a 200 amp line drop?? a 4 piece unit works well for 60 amp drop? i have made 20 of these and have installed these on all my neighbors? line drops? my nasty noise problems are history???? 73 ray nr1r



________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com