[RFI] RFI Frustration

[Leigh L Klotz, Jr.]

I used a TH-F6A with a short SMA-BNC cable, then a Pomona BNC->Banana 
jack and a loop of wire about 6 inches in diameter taped to a piece of 
cardboard to hold its shape.  This gave me truly excellent nulls off the 
end on 5Mhz and up. Bbroadside to the loop was OK but not as precise.  
This is how I located the part of the house that had the noise...it was 
the power line conduit, which then led me inside (with invitationm 
hihi).

Leigh/WA5ZNU

On Thu, 14 Feb 2008 6:46 pm, Jim Idelson wrote:
> I took my Kenwood TH-F6A out for a walk today with the ferrite loop 
> antenna
> activated.  That radio didn't hear much with the internal antenna. I 
> can't tell
> if I'm getting close to anything with that setup. There's got to be a 
> better