[RFI] Kenwood TM-D700

Michael Coslo mjc5 at psu.edu
Mon Nov 3 10:51:24 EST 2008

On Nov 1, 2008, at 11:19 AM, Jim Brown wrote:

> On Sat, 1 Nov 2008 08:42:25 -0400, WA3GIN wrote:
>> Does anyone have a variable 12dc supply that they could use with  
>> the D700
>> and perform some testing with voltages from 13.8 down to 11.8.  I  
>> know the
>> FT-857 I have doesn't like any voltage below 12vdc.
> Bring a 12V battery up to full charge, then let it run down while  
> running
> the radio, monitoring the voltage, and observing the result. To  
> simulate
> installation in a typical vehicle, use 30 ft of #14-2 between the  
> battery
> and the radio.

This brings to mind that when it happened to me, there were possibly  
two conditions being met. It was a cold morning, and the radio was  
cold. IIRC, I was stopped, at which point the Voltage was somewhat  
less than when on the road. Possibly a combination of the two? Thermal  
disequilibrium plus a slightly lower voltage?

This is a devil of a problem to troubleshoot, since it is so  
transient. But if someone could pinpoint a trigger for the noise, it  
would be a help.

I haven't had it since the last cold weather, and not often then.

-73 de Mike N3LI -

More information about the RFI mailing list