[RFI] How much RF does your power company deliver along with the AC?

[kd4e]

The best solution in these cases has appeared to be
*and* rather than *or*.

Filtering the incoming AC should help, directional
antennas can help, a nulling system can help, digital
filtering can help, tracing and eliminating specific
sources can help.

OR, moving to the middle of 100 acres in Montana and
living completely off-grid ...

>> With power back, even with everything but a couple lights (filament, not 
>> fl), strong RF on the AC lines, and s5 - s7 on the dipole.
> 
>> Starting to think the best option would be a good filter between the 
>> disconnect and sub-panel
> 
> 
> Unfortunately, there is no magic bullet you can apply at your QTH. That 
> noise still must be eliminated at the source. The most you can do is use 
> antenna directivity (and common mode chokes) to minimize what you hear of 
> it. 
> 
> 73, Jim Brown K9YC

-- 

Thanks! & 73, doc, KD4E
FS/Swap/Wanted: http://kd4e.com/swapn.html
Free OS : http://www.PuppyLinux.com
Personal: http://kd4e.com
             |_|___|_|
             | | & | |
        /\      {|
       /  \     {|
      /    \    {|
     /   @  \   {|
     |   |~_|~~~~|
     |   -| |    |
============\ # KD4E
Have an http://ultrafidian.com day!