[RFI] Mains filter for test bench
kd7jyk at earthlink.net
Tue Nov 6 21:07:27 EST 2012
: Thanks in advance for your input.
Get an RFI filter from an old computer/printer/fax/laser copier power
supply. It will have the very common IEC-6 plug on the mains side and
either solder tabs, screw on lugs or spade connectors on the
device-under-test side. Generally free and depending on the size of the
supply, typically can handle from 6-15A for consumer products. I have a box
of them in the shop collected over two decades.
Check ebay if you need something adequate, inexpensive and can handle many,
many tens of Amps.
More information about the RFI