[RFI] Arc fault protection

[Jim Brown]

On 1/5/2013 4:04 PM, Charles Coldwell wrote:
> Every single one of these is a RF detector and is supposed to be.

I suspect that's an oversimplification.  I can believe that there's a 
high pass filter in front of the detector, but any responsible design 
should include a reasonable high frequency limit.

BUT -- it is NOT the responsibility of the ham to take ANY steps to 
solve this problem. There is NOTHING he can do to change his station to 
solve the problem other than reducing power or going QRT, and neither is 
a reasonable expectation.

73, Jim K9YC