[RFI] RF tight rooms - somewhat OT
Jim Brown
jim at audiosystemsgroup.com
Sun May 12 13:00:54 EDT 2013
On 5/11/2013 8:34 PM, n0tt1 at juno.com wrote:
> My question to the group is what, in your opinion, is the
> best/cheapest RF-tight test room he could build for himself?
Roger has outlined the general concept of a proper screen room. BUT --
many RF interference issues are the result of poor design of the
equipment involved, as well improper interconnections between the
equipment and the DUT (device under test), as and can be solved by
correcting those problems without going to the considerable expense of a
screen room.
The most common cause of RFI is "The Pin One Problem," followed by poor
equipment shielding. RFI to shielded balanced twisted pair is often
caused by Shield-Current-Induced Noise. My website includes a lot of
tutorial applications notes on these issues. http://k9yc.com/publish.htm
The Ham's Guide" is the most recent, and covers all of these issues
except Shield-Current-Induced Noise (SCIN). See the separate
audio-related tutorials for SCIN, which is mostly a problem with
microphone wiring for professional sound systems, but could be a factor
with instrumentation that uses shielded twisted pair.
73, Jim K9YC
More information about the RFI
mailing list