[RFI] clamp on ferrites at Mouser

[Jorge Diez - CX6VM]

Thanks Jim

I selected Mouser #0443167251 to use in my coaxial loops inside the shack
(LMR400/BuryFlex coaxial)  and #0431164181 for keyboard, mousse, serial to
USB cables, etc, etc.

But now with your suggestion about a bigger inner diameter on the
#0431173551 I went to see it. Mouser only accept a minimum order of 90!. At
$4,17 each. 

But I visited Dexter and they have better prices than Mouser!
 
Will be shipping to an address in USA so not problem with that, just need a
store that accept international orders.

Thanks,
Jorge
CX6VM/CW5W


-----Mensaje original-----
De: RFI [mailto:rfi-bounces at contesting.com] En nombre de Jim Brown
Enviado el: domingo, 15 de junio de 2014 02:14 a.m.
Para: rfi at contesting.com
Asunto: Re: [RFI] clamp on ferrites at Mouser

On 6/14/2014 9:35 PM, David Cole wrote:
> Thanks, I think I just found a new vendor for our group buy!
>

Some good vendors of Fair-Rite parts are Lodestone Pacific and Dexter
Magnetics. In general, the ham specialty vendors are ripoff artists, with
very high markups. Industrial vendors, like these and Arrow, are far better.

If your target is suppression at HF, be sure to buy parts that allow at
least 4-5 turns. I've done several group purchases. Most recently, we bought
about 800 pieces of a #31 clamp-on with an inner diameter of 0.75 inches.
Fair-Rite part number 0431173551. We paid about $2.65 with tax and shipping.
This is a very convenient part for the smaller diameter cables that radiate
noise generators. :)

Jorge's problem is finding a vendor who will ship to CX6.

73, Jim K9YC




_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi