[RFI] clamp on ferrites at Mouser

[Dale J.]

Do a search for "A Ham's Guide to RFI, Ferrites, Baluns, and Audio Interfacing" by K9YC.  It has all the information you will need in applying the type of cores for your situation.  It is in PDF form and free.  It should be in every hams notebook or computer.

73
Dale, k9vuj


On 16, Jun 2014, at 18:40, Jorge Diez - CX6VM <cx6vm.jorge at gmail.com> wrote:

> I am a little confused
> 
> Which material is for coaxial cables, #31 or #43?
> 
> From some answers I received "The #31 mix snap-on is what you want for keyboard and mouse cables", right?  
> 
> So material #43 is for coaxial?
> 
> 
> 73,
> Jorge
> CX6VM/CW5W
> 
> -----Mensaje original-----
> De: David Cole [mailto:dave at nk7z.net] 
> Enviado el: sábado, 14 de junio de 2014 02:27 p.m.
> Para: Jorge Diez - CX6VM
> CC: rfi at contesting.com
> Asunto: Re: [RFI] clamp on ferrites at Mouser
> 
> How odd that you just asked this question.  I am putting together a bulk order for our club, and literately just sent the email off less than 5 minutes ago.  Here is a cut from it...  
> 
> ===CUT===
> 
> Type: RG-8X, Split Core
> Part#: 431164281
> Qty: 1,  $2.13
> Qty: 10, $1.81
> Qty: 50, $1.48
> 
> Type: RG-8, Split core
> Part#: 431167281
> Qty: 1, $2.64
> Qty:10, $2.33
> Qty:50, $1.80
> 
> Type: Small Power, Split core
> Part#: 431178181
> Qty: 1, $1.71
> Qty: 10:$1.49
> Qty: 50:$1.38
> 
> Type: RG-8x, Solid Core
> Part#: 2631540202
> Qty: 1,  $0.92
> Qty: 50, $0.82
> Note: You MUST put these on BEFORE the connector goes on.
> 
> Type: FT250-31
> Part#: 2631803802
> Qty 1: $6.94
> 
> ===CUT===
> 
> --
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
> 
> 
> On Sat, 2014-06-14 at 11:11 -0300, Jorge Diez - CX6VM wrote:
>> Hello
>> 
>> 
>> 
>> Anyone that can give me a MOUSER.COM part number for good clamp on ferrites
>> for cables like keyboard, mousse, USB cables, RS232 cables, RCA to RCA
>> cables
>> 
>> 
>> 
>> Need something that open, I can do 3-4 turns with the cable and then I can
>> close it. Connectors will not go through the hole so I need something that
>> can be opened, I think clamp on is the right word for this type, right?
>> 
>> 
>> 
>> Thanks in advance
>> 
>> 
>> 
>> 73,
>> 
>> Jorge
>> 
>> CX6VM/CW5W
>> 
>> _______________________________________________
>> RFI mailing list
>> RFI at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
> 
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi