[RFI] w7ekb & ground rods
EDWARDS, EDDIE J
eedwards at oppd.com
Thu Jan 15 17:03:48 EST 2015
Here's a couple.
http://www.kf7p.com/KF7P/Products.html
http://www.smithspower.com/brands/polyphaser/
There are several others; probably Talley, Tessco, Texas Towers, AES, & HRO may have some as well.
73, de ed -K0iL
-----Original Message-----
From: RFI [mailto:rfi-bounces at contesting.com] On Behalf Of Kenneth G. Gordon
Sent: Thursday, January 15, 2015 3:40 PM
To: Jim Brown; Rfi at contesting.com
Subject: Re: [RFI] w7ekb & ground rods
On 15 Jan 2015 at 12:27, Jim Brown wrote:
> The only "issues" that arise is failing to bond them together. The
> simple rule -- you can have as many earth electrodes as you like, but
> they MUST be bonded together, and to the power system safety ground bus
> at the service entrance.
>
> http://k9yc.com/GroundingAndAudio.pdf
>
> 73, Jim K9YC
Jim:
After reviewing the above link (and downloading it), it seems quite obvious
that I have one hell of a lot of work to do.
Can you suggest a source for flat wide copper "tape" ?
And for copper braid, other than from old coax? (I suspect braid from old
coax will not be wide enough, and if it is corroded, the individualy strands of
copper may be insulated from one another.)
So....it appears that my moving that useless 30+ feet of #8 "ground" wire DID
reduce my local noise level by a good 10 dB.
I would never have thought of that in a million years.
Ken W7EKB
_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
----------------------------------------------------------------------
This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
More information about the RFI
mailing list