[RFI] RFI Digest, Vol 149, Issue 6

[Leigh Sedgwick]

I use my MS Surface Pro and an RF Space SDR-IQ for HF (along with my trusty
Tecsun PL-660).  Antenna is with a hand-held National RF, Inc HFDF HF/VHF
amplified loop.  I use my Kenwood TH-F6 for VHF.  This set up works very
well.  Might try and find a suitable up-converter for the SDR-IQ one of
these days.

Mike
K7PI

-----Original Message-----
From: RFI [mailto:rfi-bounces at contesting.com] On Behalf Of Jim Miller
Sent: Friday, June 19, 2015 09:20
To: rfi at contesting.com
Subject: Re: [RFI] RFI Digest, Vol 149, Issue 6

I'm in the process of trying to do just that with the SDR stick from Nooelec
including their upconverter. Parts should be here next week. Still trying to
figure out what tablet or laptop to use with it.

73

jim ab3cv


On Fri, Jun 19, 2015 at 12:00 PM, <rfi-request at contesting.com> wrote:

> Message: 1
> Date: Thu, 18 Jun 2015 10:06:41 -0700
> From: "KD7JYK DM09" <kd7jyk at earthlink.net>
> To: "rfi" <rfi at contesting.com>
> Subject: [RFI] SDR, Software Defined Radio?
> Message-ID: <001201d0a9e9$2a1e7e60$9155fb48 at mainframe>
> Content-Type: text/plain;       charset="iso-8859-1"
>
> Anyone using SDR to monitor RFI across a wide bandwith AND into higher 
> frequencies, such as UHF?
>
> Results?
>
> I regularly hear arcing poles to ~500 MHz, wondering how it would look 
> at a bandwidth of, for example, a MHz or two, or more, depending on 
> the SDR dongle and its capabilities.
>
> Kurt
>
_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi