[RFI] Tescun PL-660 Antenna

[Tom Thompson]

Hi John,

I have found that a 3-element yagi in the VHF or UHF range works best 
for power line noise.  Tracking power line noise at HF is difficult 
because the long lines act as antennas and it is hard to pin point the 
source.

Tom   W0IVJ

On 4/19/2016 9:10 AM, john at kk9a.com wrote:
> I have a constant noise source that is loud on 10m and 15m. I got a beam
> heading and then I walked along the main road where the power lines are
> with my Tescun PL-660. I listened on 10m using the built in antenna set
> for DX sensitivity and outside of an inconsistent short noise burst I
> heard nothing. How close to the noise do I need to be to pick it up with
> this receiver and built in antenna? Is there a better antenna that I can
> use with the Tescun for locating the source?
>
> John KK9A
>
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
>