[RFI] Light fixtures

[Jim Brown]

On Fri,7/1/2016 12:45 PM, Bob K6UJ wrote:
> You are not alone.  I put in some LED strip lights under our kitchen 
> cabinets. 

Consider LED strips from Wired Communications, but do NOT use one of 
their power supplies, which are likely to be noisy. Instead, use a 
vintage linear wall wart in the range of 12V -- they are rather tolerant 
of voltage, and will, to some extent, self-regulate. The five of their 
strips that light my shack draw a combined 1.2A from the shack 13V 
battery system. They exhibit at Pacificon and Visalia, which is how I 
found them.

https://www.wiredco.com/LED_Lighting_Low_Voltage_s/1874.htm

They also sell some inline switches that you can use if you don't have 
another easy way to switch them.

73, Jim K9YC