[RFI] Strong hash now gone, but where and why?

Roger (K8RI) k8ri at rogerhalstead.com
Wed Feb 15 00:35:33 EST 2017


Many times I've remarked about not having RFI in 555 years as a ham. 
That came to a screeching halt around last spring with a tremendous 
noise.  Previously I had been listening with no RFI. I had what I 
thought was a grounding problem in the shop.  WD8BPT tightened both 
neutrals, but they were almost as tight as we could get them.

I thought I'd just use the rig in the house but that noise, typical of 
switching supplies made 160 - 40 unusable.  Then Dennis (WD8BPT) 
suggested getting a good antenna for most of the bands in case we didn't 
get the LM470 and C19XR in operation before the weather turned bad. 
Sooo...I hooked the system to the AV640.

Back to the noise problem. I had discovered the pure sin-wave line 
conditioner was the worst generator and I'd work on it, time 
permitting.  I turned on the rig and all was quiet where I had close to 
S9 noise previously with the line conditioner off. I fired up the line 
conditioner and no noise, where a few months earlier turning it on 
produced a tremendous noise.

This leaves me a bit puzzled, but the noise MAY be due to a poor neutral 
in the house.  I need to get someone locally to tighten up those 
connections.

The feeds for the house and shop do come from the same pole pig. The 
only difference I can think of is there are no rigs in the shop at present.

73, Roger (K8RI)




---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




More information about the RFI mailing list