[RFI] Hybrid Car RFI

[Jim Brown]

Thanks Dave. Your input as an EMC pro are greatly appreciated.

The reason I ask is that, historically, nearly all of the emphasis on 
EMC from mfrs seems to at VHF and above. It's encouraging to see that 
some are now looking lower in frequency. Almost 15 years ago, Warren 
Shulz, CE at WLS (50kW on 890 kHz about 25 miles SW of Chicago) told me 
that Fords were so noisy that their radios couldn't copy his station in 
northern suburbs 50 miles away!

73, Jim K9YC

On 12/1/2018 12:49 PM, David Eckhardt wrote:
> This last time around when we ordered ours, no, I did not frisk the 
> lot vehicle below 10 or so MHz, if that is what you are inquiring 
> about.  The friend's vehicle which I wrote the report on was evaluated 
> to 1 MHz at the bottom end.  In some 35 years of doing EMC/RFI for a 
> living,  I've never experienced a touch screen as dirty as the one on 
> which I wrote the report. Of course, touch screen haven't been around 
> that long, but.......
>
> Dave - W ØLEV
>
> On Sat, Dec 1, 2018 at 8:44 PM David Eckhardt <davearea51a at gmail.com 
> <mailto:davearea51a at gmail.com>> wrote:
>
>     Yes, it did, down to1 MHz.
>
>     Dave - WØLEV
>
>     On Sat, Dec 1, 2018 at 8:18 PM Jim Brown
>     <jim at audiosystemsgroup.com <mailto:jim at audiosystemsgroup.com>> wrote:
>
>         Did your work include HF?
>
>         73, Jim
>
>         On 12/1/2018 10:09 AM, David Eckhardt wrote:
>         > When we finally ordered our new Jeep Rubicon JL, I took my
>         portable
>         > spectrum analyzer to frisk a similar vehicle on the lot.
>
>         _______________________________________________
>         RFI mailing list
>         RFI at contesting.com <mailto:RFI at contesting.com>
>         http://lists.contesting.com/mailman/listinfo/rfi
>
>
>
>     -- 
>     *Dave - WØLEV
>     *
>     */Just Let Darwin Work/*
>     */Just Think/*
>
>
>
> -- 
> *Dave - WØLEV
> *
> */Just Let Darwin Work/*
> */Just Think/*