[RFI] LED Bulb noise Eleta E12

[Dave Cole (NK7Z)]

Hi,
If you have a photo of light from the the P3 I could use it for my RFI 
noise page at:

https://www.nk7z.net/rfi-snapshots

73s and thanks,
Dave
NK7Z
https://www.nk7z.net

On 02/18/2018 09:31 AM, W0MU Mike Fatchett wrote:
> I started having some very bad noise problems more noticeable on 10m. 
> Power off the house and found the circuit where the noise was coming from.
> 
> Turned off a light that had an led bulb in it and that particular noise 
> is gone.
> 
> My tower and 3 ele beam is about 100 ft from this noise source.
> 
> The bulb in question is a Eleta Candle light  E12  candelabra base  warm 
> white ac85-265v  3w
> 
> the noise produced on the K3 Meter was S9 to a bit over!
> 
> Buyer beware.  I purchased these off Amazon.
> 
> I have some others I will test to see if this particular bulb is just 
> bad or they are all this way.
> 
> W0MU
> 
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi