[RFI] Smoke Detectors Beeping

[Stanley Zawrotny]

All,

I have an electrician coming on Wednesday to correct a faulty circuit in my home office and install individual 110 and 220 v. circuits for my radios. I will have him look at the lines for the smoke detectors. If the a.c. wiring quality is any indication, I expect that they did a similarly poor job installing the smoke detectors.

Thank you everyone for your advice.

Stan, K4SBZ

"Real radio bounces off the sky."

> On Jul 28, 2018, at 7:32 PM, Steve Bell <eagle572 at comcast.net> wrote:
> 
> During any installation of wired thermostats, smoke detectors, etc.  I highly
> recommend not just twisted pair control lines, but make sure that the
> lines are twisted pair with shield.
> 
> If the installers cannot supply such shielded cable, you can get it from your local electronics supply
> house.
> 
> The shield connection itself must also not be left disconnected.
> 
> Steve Bell KJ7OG
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi