[RFI] Dimmer Switch

Howard Lester howard220 at gmail.com
Tue Dec 10 12:52:28 EST 2019


The one in question is an “Ecosmart (Home Depot) Dimmable 1918ZF, 3000K, 8W.” The lamp is plugged into an electric timer with a mechanical clock wheel. During a net (when signals are regularly present) I’ll try it again, this with the lamp plugged directly into the outlet, bypassing the timer. Before using this bulb, I was using another LED, and it caused the same noise. I can’t recall, though, what bulb that one was. 

FWIW, I have Juno 10W LED Trac lights that are on a Lutron DIVA dimmer ($70 for the dimmer!). The dimmer is specifically recommended by Juno. While there is no hum or buzz to the lamp itself, I get noise in my HT when the dimmer is set anywhere but at its lowest setting. 

If you don’t hear from me again on the Ecosmart bulb, it’s because in or out of the timer made no difference. 

Howard


> What brand Howard? 
> 
> I have mostly only GE brand LED 'bulbs' here.
> 
> I have noticed when near the GEs some 'noise' at VHF, but must
> be close, within a foot or so.
> 
> 
> de AA5CT
 


More information about the RFI mailing list