[RFI] Trying to locate the Part 15 compliance note...

Jim Brown jim at audiosystemsgroup.com
Thu Mar 14 14:21:40 EDT 2019

On 3/14/2019 8:30 AM, Dave Cole (NK7Z) wrote:
> I have sent my KPA500 to Elecraft to get a compliance check in 
> preparation for a meeting with the vendor, and the owners of the 
> affected stove.
> I am considering asking the vendor to pay for this once the amp is 
> proven good...  But that will happen after the RFI issue is solved. 


There is absolutely NO technical reason for doing this. By definition, 
any product that is not intended to act as a radio receiver should be 
susceptible to radio transmissions. If it is, it is defective in design 
and/or construction. The only way we could possibly be at fault in an 
RFI case is if we transmit harmonics, intermod, or spurs ON THE 
FREQUENCY that a radio receiver is tuned to. Anything else is the fault 
of the victim product.

73, Jim K9YC

More information about the RFI mailing list