[RFI] SDR software that displays actual waveform of received signal????

[Don Kirk]

 Hi Ed,

I'm looking for very specific software that shows the received signals
waveform as a function of amplitude vs. time just like an oscilloscope
would and just quickly looking at the SDR UNO manual it's not obvious that
it has this feature.

Thanks,
Don

On Mon, Feb 3, 2020 at 9:48 AM EDWARDS, EDDIE J via RFI <rfi at contesting.com>
wrote:

> Just found this SDR which I hadn't heard of before.  Has anyone on this
> group played with this unit?
>
>
> https://www.dxengineering.com/parts/dxp-dx-patrolmk4?seid=dxese1&gclid=EAIaIQobChMIwIfM_Me15wIV2iCtBh0UsgWfEAQYAiABEgIcmPD_BwE
>
> DXpatrolMK4 seems to come with all you need (cable, adapter, 2 antenna
> ports) and cost less than SDRPlay or the others.
>
> 73, de ed -K0iL
>
> -----Original Message-----
> From: EDWARDS, EDDIE J
> Sent: Monday, February 3, 2020 8:22 AM
> To: 'Don Kirk' <wd8dsb at gmail.com>; RFI <rfi at contesting.com>
> Subject: RE: [RFI] SDR software that displays actual waveform of received
> signal????
>
> Don,
>
> I just purchased an SDRPlay unit, and on their web site they have free
> downloads of SDR UNO.  Just did the download here at work, so I'm sure
> you'll be able to as well.  https://www.sdrplay.com/downloads/
>
> Have not had time to set up an antenna and test it out yet.  It'll be a
> spring project when I get time.  I think Dave, NK7Z uses this SDR radio and
> app.
>
> 73, de ed -K0iL
>
>
> -----Original Message-----
> From: RFI On Behalf Of Don Kirk
> Sent: Monday, February 3, 2020 7:24 AM
>
> Appreciate someone pointing me toward SDR software that can accomplish
> this task, especially if I can use it with an RTL-SDR receiver.  I believe
> I have seen SDR software that can accomplish this, but don't recall what
> software it was, and if it would work with an RTL-SDR receiver.
>
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>