[RFI] RF proof router

[Dave]

I am using a Netgear Nighthawk R7000 v2 router with Fresh Tomato aftermarket firmware. No issues with the router resetting (locates about 35 feet from a G5RV used QRO on 40 meters. Also no discernible birdies seem on any band from the router. 

With the aftermarket firmware I get A+ results on the DSL Reports speed test. Buffet bloat is not an issue. 

Dave wo2x

Sent from my waxed string and tin cans. 

> On May 31, 2020, at 2:10 PM, Clay Autery <KY5G at montac.com> wrote:
> 
> Synology RT2600ac - I use it here in my house...  It sits right under the corner of my horizontal loop, and have never 1) seen it take a hit from the xmitter, or 2) show RFI in my P3...
> It is a DC item, so you can run it on 12 VDC regulated down with a linear regulator off your main linear supply and eliminate the wall wart it uses for PSU.
> 
> It is also VERY flexible for remote restart, reboot, update, config, et al....  Synology is awesome.
> 
> ______________________
> Clay Autery, KY5G
> (318) 518-1389
> 
>> On 05/31/20 09:03, Michael Coslo wrote:
>> Good day all,
>> 
>> I’m looking for a new router for our mountaintop station.
>> 
>> My needs are 2 and 5 GHz wireless, at least 4 ethernet. The main criteria is something that isn’t sensitive to RFI. The last router we had was apt to reset whenever someone transmitted on 40 meters. (Netgear) Any suggestions for a good router?
>> 
>> - 73 -
>> - Michael Coslo -
>> Frequency Coordinator, Beaver Stadium
>> 814-404-3991
>> mjc5 at psu.edu
>> mjcn3li at gmail.com
>> 
>> _______________________________________________
>> RFI mailing list
>> RFI at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi