[RFI] Report on 12V 750W server supplies

[Brian Moran]

 I recently purchased the DPS-750RB A model, which is also shown as a HSTNS-PD18. Using the instructions on YouTube, I easily changed the voltage to 13.9v. I haven't had time to look for RFI using an SDR, and certainly won't have as extensive a test setup as Gary does. 

I did not try to adjust higher than 14v, though that might be a good experiment. If I had any confidence I wouldn't damage something by doing so, I'd be willing to try higher voltages :-)

-Brian N9ADG


    On Thursday, June 4, 2020, 10:41:17 PM PDT, Jim Brown <jim at audiosystemsgroup.com> wrote:  
 
 On 6/4/2020 2:49 PM, Gary Johnson wrote:
> Output is fixed right at 12V but there are notes on the web about how to change an internal feedback resistor to tweak that up a bit.

Thanks Gary. Do you know how high V+ can be set? Some radios, notably 
Elecraft rigs, have lower IMD at higher supply voltages, with 15V max.

73, Jim K9YC
_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi