[RFI] Rfi help
AA5CT
jwin95 at yahoo.com
Sat May 16 19:24:05 EDT 2020
Chuck,
I have used standard PL-259 ("UHF") connectors on RG-214 cable.
Don't tin the braid excessively and it can be worked into the PL-259
connector part with the solder holes.
Just don't forget the screw-on part before proceeding!
Station jumpers for HF here are 214 on account that was the only large
cable I had on hand.
73 de AA5CT Jim
.
.
On Saturday, May 16, 2020, 05:26:51 PM CDT, chuck.gooden <chuck.gooden at comcast.net> wrote:
I beleive the connectors used on Rg214 are different part numbers and are more difficult to install correctly.
Chuck K9LC
-------- Original message --------From: "Kenneth G. Gordon" <kgordon2006 at frontier.com> Date: 5/16/20 3:55 PM (GMT-06:00) To: Randy Davenport <pastor.spaceboy at gmail.com>, jwin95 at yahoo.com Cc: rfi at contesting.com Subject: Re: [RFI] Rfi help
On 16 May 2020 at 19:55, AA5CT wrote:
> Two - shields?
> That would be RG-214
Correct. I was wrong.
> Two shields each made of silver-plated copper braid.
> Inner dielectric dimension is the same as RG-213 cable
>
> RG-214 cable good (usable) to 10 GHz per spec sheets. 213 only ~ 1 GHz.
>
> Not as flexible as RG-213 though on account of all that braid.
>
> For normal HF operations (single op) RG-214 cable would be significant overkill.
Absolutely correct...and far more costly.
Ken W7EKB
_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
More information about the RFI
mailing list