[RFI] Analog Wall Wart 29v DC

[Kim Elmore]

I'll bet that it's 29 V open circuit and between to 24-28 V under load. 
See if you can create a test set up with those voltages to make sure.

Kim N5OP

On 12/12/2021 4:51 PM, Jim McCook wrote:
> I'm looking for some 29v DC @ 210ma or slightly higher analog wall 
> warts to replace the switching garbage supplies that came with outdoor 
> LED Christmas lights.  Filtering was a waste of time. Without analog 
> supplies these beautiful lights go right to the trash with their 
> switchers.  I find nothing from the usual sources, including Mouser, 
> DigiKey, Jameco.  73, Jim W6YA
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
-- 
Kim Elmore, Ph

Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP 
SEL/MEL/Glider, UAS, N5OP, 2nd Class Radiotelegraph, GROL)

/“I occasionally play works by contemporary composers and for two 
reasons. First to discourage the composer from writing any more and 
secondly to remind myself how much I appreciate Beethoven." – Jascha 
Heifetz/