[RFI] Generac 16KW Standby Generator - NO RFI!

[James Jordan]

Slightly off the Generac topic, taking a circuit off line at the breaker does not ALWAYS identify that circuit as the culprit. Remember house wiring is also an antenna and you might just be separating that superior antenna from other wiring. Something to remember if you can’t trace the noise to a device on that particular circuit. 
73,
Jim K4QPL 

Sent from my iPhone

> On Aug 22, 2022, at 9:27 AM, EDWARDS, EDDIE J via RFI <rfi at contesting.com> wrote:
> 
> Hi Chris, 
> 
> Just wondering if you had your DXE NCC-2 Noise Phaser turned on or off during your outage testing?  
> 
> 73, de ed -K0iL
> 
> -----Original Message-----
> From: RFI On Behalf Of Christopher Wawak
> 
> Hi all, I had a Generac 16KW generator installed early this year.  The generator is specced to power my entire house load. Luckily/unluckily haven't had a chance to really try it out. Until today.
> 
> Today, we've been without utility power for a few hours, and I noticed absolutely no interference to my HF radios! I didn't check VHF unfortunately, I wanted to take advantage of the lack of neighborhood HF noise!
> 
> Utility power literally just came back on, and I could see the noise floor jump 2 s units. I'm sure a lot of this is installation, radio, and antenna specific, but in my case, I'm pleased.
> 
> Happy to answer questions about the unit, but my verdict is, in my installation, it seems quiet.
> 
> 73 KC2IEB Chris
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> https://urldefense.com/v3/__http://lists.contesting.com/mailman/listinfo/rfi__;!!AvPafw!L_FLGVg9FyqT5BPyVNd2-Sq14bfUx8jFpexHykTSsIE7rYpxUYdzsKuDEr_E8pD7SYZjtnNU_G4lCg$  
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi