[RFI] Replacing Fluorescent Lights (4x2) with LED

[Dan K2YWE]

I'll add that I had to adapt my connectors to the ones that come with the
Toggled tubes, so you may want to check that before jumping in. IT came
with adapters, but not one for my old fixture.
73, Dan


On Mon, Apr 3, 2023 at 11:14 AM Dan K2YWE <dan.k2ywe at gmail.com> wrote:

> I replaced my overhead 48" fluorescent tubes with Toggled brand direct
> off-line LED tubes and have zero interference from them in the same room as
> the radios and not that far from my antennas. They connect directly to the
> AC mains voltage.
> Home Depot carries them and may also have complete assemblies by Toggled.
> 73, Dan
>
>
> On Mon, Apr 3, 2023 at 10:51 AM Chuck Gooden <Chuck.Gooden at comcast.net>
> wrote:
>
>>
>> I had a ballast fail in a fluorescent light (4'x2') installed in a drop
>> ceiling.  I am planning on replacing it with a LED flat Panel lights and
>> was wondering if anyone has had any issues with RFI. with any of the
>> brands being carried at the big box stores (Home Depot, Lowes,
>> Menards).  I will most likely also replace the other similar fluorescent
>> light at the same time also.
>>
>> Chuck K9LC
>>
>>
>> _______________________________________________
>> RFI mailing list
>> RFI at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>