[RFI] Choosing a POE in a RF-rich environment
David Colburn
qrv at kd4e.com
Sun May 21 19:40:51 EDT 2023
OK, cool, will put that in the mix. Thanks!
On 5/20/23 11:03 PM, F. Grant Saviers wrote:
> An example of unexpected results with ethernet cables. I replaced a unshielded CAT5 with shielded CAT6 and RFI from the new cable was substantially higher. It was inside my steel shop/shack. Lesson: use fiber links whenever possible.
> Grant KZ1W
>
> On Saturday, May 20, 2023 at 05:01:53 PM PDT, Greg Troxel <gdt at lexort.com> wrote:
>
> David Colburn <qrv at kd4e.com> writes:
>
>> If I run lines to an outdoor camera that are outside for more than
>> several feet,
>>
>> should I protect them with something like this?
>>
>> https://www.amazon.com/Tupavco-Ethernet-Protector-Gigabit-1000Mbs/dp/B00805VUD8
> There's a very deep question lurking. We more or less take on faith
> that cables that are outside are dangerous and ones entirely inside are
> safe. But the house is often not a sealed metal box. I'd be interested
> in comments from people who understand better.
>
> But, it does make sense to me to treat the Ethernet cable to the camera
> the way that code requires antenna coax to be treated, as it's not so
> different from the lightning viewpoint.
>
> 73 de n1dam
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
More information about the RFI
mailing list