[RFI] USB Cable Shield Resistance was: Re: [N1MM+] open question about RFI & USB

[Pete Smith N4ZR]

Interestingly, I just tested the shielding on a USB A to USB C cable I 
have, which looked like it should be fine, with a transparent jacket 
over woven shielding and a big ferrite bead - about 1 meter long, and 
measured 2.7 ohms - not good.  What should be consider to be the upper 
permissible shield resistance?

Moving this issue to the RFI reflector now...

73, Pete N4ZR

On 1/16/2024 5:01 AM, Janez Majdic via groups.io wrote:
> Maybe also good to read:
> https://www.yoctopuce.com/EN/article/usb-cables-shielding-matters-as-well
>
> Regards, Janez - S51J
> _._,_._,_
> ------------------------------------------------------------------------
> Groups.io Links:
>
> You receive all messages sent to this group.
>
> View/Reply Online (#82277) 
> <https://groups.io/g/N1MMLoggerPlus/message/82277> | Reply To Group 
> <mailto:N1MMLoggerPlus at groups.io?subject=Re:%20Re%3A%20%5BN1MM%2B%5D%20open%20question%20about%20RFI%20%26%20USB> 
> | Reply To Sender 
> <mailto:s51janez at yahoo.com?subject=Private:%20Re:%20Re%3A%20%5BN1MM%2B%5D%20open%20question%20about%20RFI%20%26%20USB> 
> | Mute This Topic <https://groups.io/mt/103743186/515779> | New Topic 
> <https://groups.io/g/N1MMLoggerPlus/post>
> Your Subscription <https://groups.io/g/N1MMLoggerPlus/editsub/515779> 
> | Contact Group Owner <mailto:N1MMLoggerPlus+owner at groups.io> | 
> Unsubscribe 
> <https://groups.io/g/N1MMLoggerPlus/leave/1691550/515779/1128496821/xyzzy> 
> [pete.n4zr at gmail.com]
>
> _._,_._,_