[RFI] Finally located my RFI

[Dave (NK7Z)]

Hi Jim,
No problem on winding turns, and thanks!!!  I will tune the ferrite to 
24 MHz., and see how that works...  I am setting up a test jig to hold a 
ferrite out in the closest I can get to free space, being fed as it 
would be in the real world.  I will adjust the resonant frequency to be 
24 MHz., that should give me the best shot at using this to kill this 
mess...  THANKS again!

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 6/21/24 10:01, Jim Brown wrote:
> On 6/21/2024 4:56 AM, Dave (NK7Z) wrote:
>> Thanks for the datapoint, are you saying that 31 would be a better, 
>> (as opposed to 43), as a choice for 18 to 26 MHz suppression?
> 
> Yes, it is the ONLY good choice, but we must wind turns.
> 
> 73, Jim K9YC
> 
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi