[RTTY] Re: [WriteLog] Open For Suggestions!

[DieselCar@aol.com]

MRBILL1953@aol.com writes:

<<. . . .  I'm using a Yaesu FT-1000MP along with a AEA PK-900. Since I 
installed this radio I wanted to hook it up using FSK. . . . . when I 
transmit I get nothing but a  steady tone on the output, no shifting RTTY 
tones. . . .
>>

Bill,

I do not have an AEA PK-900. However, on the FT-1000MP, the RTTY 4 pin DIN is 
as follows:
1 - FSK OUT
2 - AF IN
3 - PTT
5 - GND

Since my soldering is so sloppy, I only soldered pin 1. I use the phono PTT 
to activate transmit and audio from AF OUTPUT stereo jack. My setup is being 
driven by a DSP599zx.

Gud luck
   ue Rick W4UEF