[RTTY] setting up fpr NAQP

[Shelby Summerville]

Name is all that is required from DX stations!
C'Ya, Shelby - K4WW
----- Original Message ----- 
From: Bill Turner <w7ti@dslextreme.com>
To: John <vk4cej@hamsnet.net>; <rtty@contesting.com>
Sent: Saturday, July 21, 2001 7:54 AM
Subject: Re: [RTTY] setting up fpr NAQP


> John, please don't repeat the received info when you QSL the other
> station's report.  When there is QRN/QRM it can easily be mistaken for
> YOUR report.  It's best to just say "QSL ur <myname> <myQTH>" and let
> it go at that.  This is true for all contests, not just NAQP.
> 
> Comments, anyone?
> 
> 73, Bill W7TI
> 
> 
> ----- Original Message -----
> From: "John" <vk4cej@hamsnet.net>
> To: <rtty@contesting.com>
> Sent: Saturday, July 21, 2001 4:09 AM
> Subject: Re: [RTTY] setting up fpr NAQP
> 
> 
> > I have been through the WF1B help (alt h) and cannot see anywhere
> where the
> > NAME field required for NAQP is supported by one of the buffer
> variables..
> > Am I missing something ???      -         I want to setup a function
> key
> > that will qsl a report given to me with something like...
> >
> > "<1> I QSL your <rxname> / <2> - for your log my name is <txname>
> QSL ?? de
> > <11> k"
> >
> > John - vk4cej
> >
> > PS.. The way I read the rules there is no need for signal strength /
> > readability / tone reports  (599)... is this correct ???
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>