[RTTY] FT-1000 and SCS PTC-2 connection

[WA9ALS - John]

> Hello all,
> in preparation of my (now confirmed) trip to OX (Greenland) i have to
> prepare my PTC-2 for connection to an FT-1000. Unfortunately i don't know
> much about this rig, and don't know any hams in my vicinity who has one.
>
> What i need is how to wire a cable for FSK and AFSK operation with the
> FT-1000 and PTC-II. I would need type of plug/jack and the pinout for AF
in,
> AF out, PTT, FSK keying, perhaps +12V pover and Ground. Ideally from an
> accessory socket, not via the microphone plug.

Ekki, I'm 99.9% sure that the FT-1000 has the same acc connectors as the
990, 1000MP, and MARK-V 1000MP.  If you can confirm that 100%, then the
connector pinouts are at:
http://www.qsl.net/wa9als/pk232.htm

There are RTTY (FSK) [4-pin DIN] and (AFSK)[5-pin DIN] acc connectors.  GL -
73