[RTTY] RE: second soundcard

[Sante - IK0HBN]

May be the best hint to avoid the harrass of lack of IRQ's should be adding 
more serial ports....
3 days ago I purchased and installed a MOXA SMARTIO C168H/PCI which, I 
hope, resolved for ever my lack of IRQ's. Now I have 2 COM's onboard and 8 
COM'S on the multi serial port for a total of 10 COM's...ALL PERFECTLY 
running at same time.
On CD I found drivers practically for all the OS, including the new XP and 
the old DOS.
With XP and WIN98 the system runs like a train, but after a weekend spent 
over, I was not able to set them in a pure DOS 6.22.
Let's say that I wasn't able to understand how to do it.
Their page is:
<http//:www.moxa.com> and the product: C168H/PCI

Disclaimer: I am NOT involved with MOXA, I am only a real happy customer!

At 17.58 08/07/2002 +0000, you wrote:
>WA9ALS - John wrote:
>
> > I'm no expert on this, but N1RCT's old RTTY web site had a little 
> discussion
> > about this.  He made the point that FSK/PTT -only- transmit data and can
> > share a com port (IRQ) with something else.  In Bill's example, the "usual"
> > would be for COM 1 and 3 to share the same IRQ - Com 1 is rig control, but
> > COM 3 is only for CW keying.  A similar analogy is present for COM 2 and 4.
> > I've shared COM ports before like this, especially a modem and an FSK/PTT
> > cable.  I would think that rig control would be more demanding  (tx/rx) 
> than
> > a modem, especially fi the modem were not in use.  I'm sure the modem and
> > rig control couldn't share the same com port, but some of these cables we
> > make for fsk/ptt/cw -can- share with other devices at times.
>
>This can be done in Windows also, but choices are limited. For
>example, LOGGER, by K4CY does this with PTT and Radio Control. As Bob
>once explained it to me, When the PTT command is sent, another command
>is sent to bypass the entire rig control program. In other words,
>don't interrogate the radio.  Normally, Rig control is active and PTT
>is just checked during the cycles. Logical, since you hardly need Rig
>Control on transmit.
>
>Good stuff from John.
>
>73
>Ed
>_______________________________________________
>RTTY mailing list
>RTTY@contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty