[RTTY] Can't Print

[Bill Turner]

On Tue, 11 Jun 2002 20:53:07 -0500, Bill Hawkins wrote:

>Hi all,
>I am still learning and I have a question.
>While reading other people's mail, most of the time I can print both sides
>of the QSO
>when the signals are good. Many times one side is much weaker but still
>prints fairly good. Sometimes one side, usually DX, is real weak but It is
>plainly visible on the spectrum screen and easily heard but absolutely no
>readable print. I use Mmtty.

_________________________________________________________

1. Be sure squelch is off or set very low.
2. Try reversing mark/space.
3. Try a different Profile, especially Fluttered or Multi-Path.

Bill, W7TI