[RTTY] PK232 Question

[Richard Kriss]

Good tip from K9MI.  I keep forgetting about the hole in the bottom and just
force it out with the Command-C's from a term program.  The only problem
with pulling the jumper is you loose your settings.

73, Dick - AA5VU

On 6/17/04 12:15 PM, "Mike Brown" <k9mi at sbcglobal.net> wrote:

> Bob, if Richard's idea doesn't work, you should be able to set
> the PK 232 back to factory defaults by pulling off the jumper on
> the underneath side of the 232. Easy to see, there's a hole
> there, and you can use tweasers or needle nose pliers to remove
> the jumper. I think the book says to leave it off 5 minutes.
> This "should" get you back to factory defaults and get your cmd:
> prompt back.
> 
> 73, Mike K9MI
> 
>