[RTTY] Upside Down

[K4SB]

> Check the Omni owner's manual and see if there is a way to change the TX
> polarity only.  I don't have an Omni, but many other rigs have this
> capability via a menu choice.
> Bill, W6WRT

The OMNI doesn't have this choice. I replied directly to Bill, but
again, the solution is to reverse the Base-Emitter connections in the
interface.

You also have to set the TX offset to + 1.41 kc to put the RX and TX
in sync with each other.

73
Ed