[RTTY] HAL ST-8000

[jduerbusch at charter.net]

There is a nice artice on putting the ST-8000 ahead of the PK-232 on my website:
http://www.qsl.net/k0bx

I used this article to put a Dovetron MPC-1000 ahead of my PK-232.  Used the Dovetron for receive and the PK-232 for sending FSK.  Worked very well and easy to setup.  Take a look.

Joe K0BX


From: Kok Chen <chen at mac.com>
Date: 2004/11/09 Tue PM 02:30:47 CST
To: RTTY Reflector <rtty at contesting.com>
Subject: Re: [RTTY] HAL ST-8000

On Nov 9, 2004, at 12:12 PM, K7HPH wrote:
> Does anybody know if there are any Windows based RTTY DX/Contest 
> programs available that will interface to RTTY TU's such as the HAL 
> ST-8000?

If you have a TNC that your computer can interface to, the easiest way 
is to use the ST-8000 as a remodulator (regenerator) ahead of that TNC.

You still transmit through the TNC, but the rig's receiver output is 
connected to the ST-8000 and the TNC gets a clean regenerated signal 
from the ST-8000.

Same trick works with the Timewave DSP-599zx, by the way.

73
Chen, W7AY
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty