[RTTY] RITTY 4.5 Issue

A.J. Cioffi registered at hvc.rr.com
Sat Oct 23 10:33:16 EDT 2004


There are two autoexec.bat files in my system.  One resides in
C:\Windows\Command\EBD  and I have one that resides in  C:\

Which autoexec.bat file does RITTY look at when starting?  

Tony - N2KI
SYSOP - N2KI DX CLUSTER
dxc.n2ki.com:7300
RF Gateway 145.650
Website: www.n2ki.com
DX Spoken Here


> -----Original Message-----
> From: Tom Homewood [mailto:w1to at adelphia.net]
> Sent: Friday, 22 October, 2004 19:48
> To: n2ki at amsat.org
> Subject: Re: [RTTY] RITTY 4.5 Issue
> 
> I added the following line to my autoexec.bat file and sound worked on
> my
> 233 mhz Compaq machine
> 
> SET BLASTER=A220 I5 D1 T4
> 
> Those are address parameters for the sound card. I5 is the irq interrupt
> number and 220 is the address.
> 
> Tom
> 
> ----- Original Message -----
> From: "A.J. Cioffi" <registered at hvc.rr.com>
> To: "'RTTY'" <rtty at contesting.com>
> Sent: Friday, October 22, 2004 7:26 PM
> Subject: RE: [RTTY] RITTY 4.5 Issue
> 
> 
> Can someone check a couple of things in their system for me?
> 
> - Look at the device manager under resources for your sound card and
> tell me
> what configuration you have for your sound card.
> - Look in your autexec.bat file and tell me what the SET BLASTER
> statement
> reads.
> 
> I can not get the software to recognize the soundcard in DOS.
> 
> Thanks
> 
> Tony - N2KI
> SYSOP - N2KI DX CLUSTER
> dxc.n2ki.com:7300
> RF Gateway 145.650
> Website: www.n2ki.com
> DX Spoken Here
> 
> 
> > -----Original Message-----
> > From: Bill Turner [mailto:dezrat1242 at ispwest.com]
> > Sent: Friday, 22 October, 2004 11:58
> > To: n2ki at amsat.org
> > Subject: Re: [RTTY] RITTY 4.5 Issue
> >
> > On Thu, 21 Oct 2004 14:04:54 -0400, A.J. Cioffi wrote:
> >
> > >Bill,
> > >
> > >When I start in a DOS prompt and try to run the program, I get "SET
> > Blaster
> > >statement missing".  It's in the autoexec.bat file so where else does
it
> > >want to see it?
> > >
> > >Tony
> >
> > _________________________________________________________
> >
> > That is the correct place for it.  I can think of only two
> > possibilities:
> >
> > 1.  The SET BLASTER statement has one or more wrong values.
> >
> > 2.  The driver for the soundcard is missing or corrupted.
> >
> > I'm not a great expert with this kind of thing so the real problem
> > might be something else, but I'd check those things first.
> >
> > --
> > 73, Bill W6WRT
> 
> 
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty





More information about the RTTY mailing list