[RTTY] Buffer TX issue

[Joe Subich, W4TV]

Pete,

What software are you using?

The problem is that the data is transferred to the virtual
port almost instantly as opposed to being paced by a hardware
UART.  If you are using MMTTY, set the "USB Port" to
"C: limiting speed."  Otherwise, you will probably need to
be content with AFSK for RTTY.

73,

    ... Joe Subich, W4TV
        microHAM America, LLC.
        www.microHAM-USA.com





> -----Original Message-----
> From: rtty-bounces at contesting.com
> [mailto:rtty-bounces at contesting.com] On Behalf Of Peter
> Sent: Tuesday, December 27, 2005 10:32 AM
> To: RTTY at contesting.com
> Subject: [RTTY] Buffer TX issue
>
>
> Healthy and Wise 06 to all!
>
> I have a Kenwood TS-570D (G) and a Belkin, FSU 103 serial
> Adapter.  When I am sending a buffer message using %E the
> transmitter goes back to receive before the message is
> completed.  Any ideas?  GL to all in RU!
>
> 73 Pete WB2OQQ
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>