[RTTY] [CQ-Contest] Radio interference problem

[N7MAL]

Sometimes a simple solution is easier than 50 pounds of ferrite and rolls of aluminum foil.
Right click anywhere on a blank portion of your desktop, then click on properties, then click on settings.
This will take you to the video setup screen in any version of windows. Next click on advanced. depending on which version of windows you are using click on the monitor settings. Inside the monitor window is refresh rate. While listening to your favorite portion of the band change the refresh rate of your monitor. You should hear the monitor noise disappear. You have not eliminated the noise you have moved it to a different portion of the band.
The only way to totally eliminate the noise is to replace the old style CRT monitor with an LCD monitor.
73



MAL               N7MAL
BULLHEAD CITY, AZ
http://www.ctaz.com/~suzyq/N7mal.htm
http://geocities.com/n7mal/





Any suggestions would be very helpful. . .

Jacob Tennant - K8JWT

PS: I did wrap all of my exposed coax with alluminum foil which dropped the interference a little bit but not much. Also checked all of the PL-259 solder joints and they are good.
_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest