[RTTY] MARK V USERS..??

[ON4ADZ]

Dear Noel

I have in use a markv with roofing and inrad filters : 1.8/8.8 + 1.8/455kzh
and 400hz/455 khz
I have also a yaesu  500hz in the second rx, and a 270hz/455khz installed in
the main rx.

As you can read on the 1000mp feflector the more you filter b4 the gain
stages how better.
So the roofing filter is a real value you can add, espially during crowed
condx.
Adding extra cyrstal fileters in the if stage 8.8 is a first step, later you
can add the expensive 455khz filters.

The filter standard 500 hz /8.8 filter is wide,adding a the 400 hz/455 of
inrad is a great improvement in selectivity.

the inrad 400 hz is working good and has deep skirts, altough during the
latest wpx i have swith in the yaesu 270 hz.
This last filter works very good and has also deep skirts.


I hope can deal with my experience.

DIRK
on4adz




-----Oorspronkelijk bericht-----
Van: rtty-bounces at contesting.com
[mailto:rtty-bounces at contesting.com]Namens NOEL POULIN
Verzonden: vrijdag 25 februari 2005 13:12
Aan: RTTY at contesting.com
Onderwerp: [RTTY] MARK V USERS..??


Hi I would like to know from the MARK V Field users, and INRAD filters, what
filters they have installed  for best performance in RTTY.They are expensive
but better than Yaesu ones..
I appreciate your comments...
Regards
NOEL
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty