[RTTY] Re: Help with keeping RF out of PC

[knormoyle at comcast.net]

>> On Tue, 11 Jan 2005, Marco Spalluzzi wrote:

> > Hi Peter, if it's an rf related problem going into the pc, you can put some
> > little isolation transformers on the soundcard in and out wires, to isolate
> > it from radio.

> Peter Laws wrote: 
> RigBlaster+ takes care of that.


Actually, the Rigblaster+ only isolates the pc to rig xmit audio
with a transformer? There is no isolation of rig rcv audio to pc. They
say to just use a straight cable. 

Schematic is at http://www.westmountainradio.com/pdf/Schematplus.pdf


A lot of people seem to also isolate the rig rcv audio to pc. Otherwise
there's a gnd to gnd connection at least?

-Kevin
KE6RAD