[RTTY] WriteLog and IC-756PRO III

[Andrei Nevis]

This is probably another "combination" - address "66" and the Radio IC-746 PRO, like mine currently is address "64" and IC-756 PRO.
  I was shown address "64" when I was testing my ICOM with DF4OR program.
  The radio and Writelog talk now fine, so I will keep address "66" for the next time.
  Thank you
  73's Andrei EW1AR-NP3D

Bill Turner <dezrat at copper.net> wrote:
  ORIGINAL MESSAGE:

At 05:41 AM 4/1/2006, Andrei Nevis wrote:

>That is interesting.
> My PRO-3 works Only when I mark 756 PRO in the Writelog Setup.
> I tried to mark all other Radios with all Baud rates - only PRO 3 
> with 9600 Baud works.
> 73's Andrei EW1AR-NP3D
>

*********** REPLY SEPARATOR ***********

Did you also change the address in the radio? The default for the PRO 
III is 6E. Try changing it to 66 and tell WriteLog it is an IC-746PRO 
and it should work.

The baud rate is independent of the address.

73, Bill W6WRT



		
---------------------------------
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.