[RTTY] AGC: on or off?
Phil Florig
W9IXX at arrl.net
Tue Jan 31 11:48:26 EST 2006
Hi all,
Tnx for all the great information here.
I have used basically the same setting as discussed here.
One caution that comes to mind, on the suggestion below, is that
if you are using the fixed audio out on the rear panel (Kenwoods here),
the audio level changes with adjusting the RF gain control. I believe
that the ICOM also changes with the RF control.. So as you reduce the
RF gain the level reduces at that "fixed" output. I leave the RF gain
to max here on RTTY.
Just a comment and agn tnx to all for the great comments/suggestions here.
73 Phil W9IXX
At 11:02 1/31/2006, you wrote:
>Having read all the replies to this one, I'm not sure I agree with using FAST
>AGC (or at least the fastest) for RTTY. I have found that I copy better
>with a
>medium-fast range AGC. In the PRO III I have my AGC set to Medium (default
>value of .5 second) and it seems to work better than when using FAST (default
>value of .1 second). I haven't experimented with other settings, but I will.
>In the '870 I use manual AGC and have the control set to the 3 o'clock
>position
>which is on the fast side but not the fastest.
>
>I have not experimented with turning AGC off while backing off the RF gain.
>Since I back off the RF gain when using the TPF in the PRO III and have
>started
>backing off the RF gain in the Kenwood, I will try this.
>
>Don AA5AU
-----------------------------------------------
Philip Florig e-mail:pflorig at ieee.org
115 Horne Rd. (or):W9IXX at arrl.net
Columbus, NC. 28722 amateur radio:W9IXX
USA MARS:AAM4NC/AAR4XX
team member:AH1A-C6DX-CY0AA-J3A-KH8SI-VP2MX
also:C6AXX-J3X-KH8/-T30,31,32,33P-VP2MPF
-----------------------------------------------
IPR Systems, Inc. tel: 1-708-385-7500
11651 Mayfield Ave. fax: 1-708-385-7515
Alsip, IL. 60803 email:info at iprsys.com
USA web:iprsys.com
INDUSTRIAL POWER SUPPLIES & RECTIFIERS
-----------------------------------------------
More information about the RTTY
mailing list