[RTTY] The other guy's TX is reversed

[George Johnson]

Steve,
Yes, this happens.  I was successful with the following approach.

I use a 756PRO2 and can split between 2 VFOs.  And each VFO can be set to 
any "mode".  and I use that nasty AFSK which I quite like...  Sooo...

1.  RTTY decoder (RITTY by K6STI) is set to "Normal"
2.  VFO A is set to USB so I can copy him "reversed"
3.  VFO B is set to LSB so I can transmit "normal"
I only use one "window" to receive with this program.

I have the option of screwing around with the mode on VFO B to reverse my 
tones if I think it might help.  YU6AO was receiving me just fine in 
"normal" tone order.
Just another approach.  You can do the same using "FSK" if you can 
independently set mode on each VFO.  Some rigs have a FSK-R setting also.
73 and good luck,
George .. W1ZT


At 07:31 PM 7/26/2006, K4FJ at aol.com wrote:

>OK, here is the problem.  The dxpedition comes on RTTY  and is transmitting
>reversed but receiving normal.
>
>I use WriteLog and RttyRite, and it is a pain to handle that  situation.  My
>old HAL software allowed me to select rx and tx  polarity.
>
>So how are the Big Guys doing it?--better than me, I  hope.
>
>73, Steve
>
>_______________________________________________
>RTTY mailing list
>RTTY at contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.394 / Virus Database: 268.10.4/399 - Release Date: 7/25/2006


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.394 / Virus Database: 268.10.4/399 - Release Date: 7/25/2006