[RTTY] Contest band planner - BARTG

Robert Chudek k0rc at citlink.net
Fri Mar 17 02:26:24 EST 2006


I created an Excel spreadsheet for the BARTG SPRING contest. I used it to help pre-plan my operating times. Although this .xls file is for the BARTG RTTY contest, it can be easily adapted for any HF contest.

If you have basic Excel skills and think this tool might be useful, you can download a copy from either of these URL: 

http://tinyurl.com/ncmbk

http://chudek.aberon.net/index.cgi?mode=album&album=./Minnesota%20Wireless%20Assn

Download the file named "2006 BARTG RTTY TIME SHEET"



Here's a brief overview about the spread sheet and how I used it:

The spreadsheet visually shows all 24 hours of Friday, Saturday, and Sunday while also showing all contesting bands (160 to 10). In addition, another section displays the contest period. This quickly shows you the 0200Z Saturday start time is actually 8:00 PM Friday in the Central Time zone. (You will need to adjust the "Local" time zone to your situation.)

I color coded the time I expect propagation for each band. Basically the low bands at night and the high bands during daylight. Some bands will be open simultaneously, so they "overlap" and are evident looking at the page.

My next step was to determine my operating times. First I reviewed the rules and found BARTG is a 48 hour event with a maximum operating time of 30 hours for a single op. Time off periods are a minimum of 3 hours.

I then began typing "on" into the various time slots and bands I expect to operate. (Each cell represents one hour on one band.) On my first pass, I populated more than 30 hours of operating time. My next step was to decide which hours to sacrifice. I quickly discovered this forces you to determine a strategy!

My final step was to number both the operating hours and off hours to make sure my schedule adhered to the BARTG rules of a minimum 3 hour off time and maximum of 30 hours total op time.

I created this spreadsheet quickly so there isn't much automation.

Does anyone know if any other tool already exists along this line?

73 de Bob - K0RC


More information about the RTTY mailing list